WHATSAPP 24/7: +371 2917 2713|info@cowcare.eu

Mixing Tips for 160/180 ml Adhesive Glue Cartridges

Mixing tips are required to adequately mix the 2-components of an adhesive cartridge through this it can perform and set at its optimum level. Apply bonding materials easily, effectively and waste free with the right adhesive dispensing equipment.

Een vraag stellen
Artikelnummer: 13050405 Categorieën: ,

Beschrijving

Mixing Tips are a universal adhesive dispensing equipment and are directly screwed on adhesive cartridges.

The here offered Mixing Tips fit on Technovit, Bovi Bond and other 160 and 180 ml cartridges. To use the 2-component glue waste-free and free of messes, the glue is pressed through the mixing tip where it gets automatically mixed to be ready for a precise application onto hoof blocks. The hoof trimmer can use the mixing tips to precisely portion the adhesive and to apply it to the block or claw.

No more annoying mixing necessary. Reduces stress and makes work more efficient.

 

Product features at a glance

  • Approx. use 10:1 cartridges
  • Directly mixes the 2-components of the glue
  • Always the same mixing ratio
  • Ideal for a proper and controlled application on rubber and wooden blocks
  • Comes in a bag of 100 mixing tips

 

Instructions for use

First, place the 160/180 ml cartridge into a Dispenser Gun. Now, remove the fastener on the cartridge and connect the mixing tip. Equalize the cartridge by pointing the cartridge straight up; then squeeze the handle to remove any air bubbles.

You can now eject a small amount of adhesive. This must be done so that the two components mix as optimally as possible. Now, apply a bead of the glue onto the block. Place the block quickly onto the pre-prepared, clean and dry, healthy claw. A heat gun can be used to dry the claw.

After around 30 seconds, the glue will have set, and after around 2-3 minutes, the claw can weight-bear again. For the greatest result the claw must be clean and dry. Leave the mixing tip in place until the next use. Replace with a new mixing tip before each new exercising.

A well-prepared claw contributes to a good and stable adhesion of the adhesive. The claw can also be roughened to increase the adhesive power. The used mixing tip may remain on the cartridge after use. The glue in the mixing tip cures and seals the cartridge. For the next application, a new mixing tip must be used. When pressing the block against the claw, do not work with too much pressure, as the adhesive layer will otherwise become too thin and no optimal adhesive bond can be created.

 

Price

  • starting from: add to quote to receive a tailored offer* (excl. VAT and delivery)

* Simply add the product to your ´Quote List´ and we will come back to you with a quotation/price tailored to you based on your requirements.

If you have any questions or further information are requested, please do not hesitate to contact us. Send us an e-mail info@cowcare.eu or give us a call (see right top corner) and we will get in touch with you as quickly as possible.

Your CowCare Team